작성일 : 15-06-21 18:57
메인 페이지에 이 메시지가 뜨면서 스코프에는 3x10^-7 미만에서만 값이 뜨는데요..
 글쓴이 : 염준혁
조회 : 1,186  
Warning: The control input of 'Phase_locked_loops_for_student/Charge_pump/Switch1' is a boolean signal. Input 3 is
passed to the output if control input is false (0), otherwise input 1 is passed to the output. The current threshold
values are being ignored. To eliminate this warning, set the criteria and threshold to any of the following three
combinations: u2 ~= 0, u2 > Threshold with Threshold equal to 0, or u2 >= Threshold with Threshold equal to 1.
Warning: Using a default value of 2.0E-009 for maximum step size.  The simulation step size will be equal to or less
than this value.  You can disable this diagnostic by setting 'Automatic solver parameter selection' diagnostic to
'none' in the Diagnostics page of the configuration parameters dialog

값을 잘못넣어서 생긴 문제인가요, 그냥 그런거랑 상관없이 프로그램상 오류인가요..?

김민규 15-06-21 19:50
답변  
저 warning들은 무시하셔도 됩니다.

그리고 스코프에서 300ns까지만 보이신다는 얘기이신건가요? 스코프에서 보고싶은 시간을 들리시고 싶으시면 simulink화면 위에 simulation 버튼 옆에 시간을 조절해주시면 됩니다.
염준혁 15-06-21 20:07
답변 삭제  
y축이 300n까지 나와요.. 모양도 가이드랑 많이 다르고

그냥 값이 안뜨고 계속 0으로 나오는거같아요
염준혁 15-06-21 20:08
답변 삭제  
그러면 제가 잘못된 값들을 넣어서 그렇게 됬을 가능성이 높은건가요?
김민규 15-06-21 20:14
답변  
저 warning들은 저도 뜨는 것이기때문에 저거랑은 상관없을 것 같습니다.

왜그런지는 저것만 보면 저도 잘 모르겠네요.